Using the Alarm Ready Schedule Feature
Verbatim Owner's Manual 7-3
7.3 Alarm Ready Schedule Modes
There are three possible Alarm Ready Schedules modes: Weekday, Weekend &
Holiday. Any combination of these three possible schedules may be enabled at
one time, however, the Verbatim may only become REARMED or DIS-
ARMED by one mode at a time. See Section 7.7, "Alarm Ready Schedule
Priorities." For example, you may have both weekday & weekend schedules
enabled at the same time or you may have all three enabled at the same time.
When the Verbatim becomes DISARMED or REARMED by an Alarm Ready
Schedule it will verbally announce which mode caused the REARM/DISARM
action. The Alarm Ready Schedule modes are as follows:
Mode Schedule
Mode 1 Weekday Schedule
Mode 2 Weekend Schedule
Mode 3 Holiday Schedule
For example, if there was a weekday schedule enabled to REARM the Verbatim
at 1700 daily, when the weekday schedule became active the Verbatim would
say, “REARMED for mode 1”. Also, when there is a local printer connected to
the Verbatim , the mode of the Alarm Ready Schedule causing the REARM/
DISARM (WEEKDAY, WEEKEND, or HOLIDAY) will be printed along with
the current time.
Holiday Timer is Linear
FEB MAR
APR
MAY JUN JUL
JAN
1993
July 2, 1993
17:00
RE-ARMED
July 6, 1993
08:00
DISARMED
Current Date/Time
AUG SEP
To Next Page
Loading...
