Verbatim Floobydust
Verbatim Owner's Manual H-19
We made each delay 2 seconds long by programming code 928 to be 2 seconds
for each delay used: program 928 2 ENTER. We then called the pager, and
determined timed the delay between the last digit dialed and the pager beep was
6 seconds.
We programmed our pager phone number: 701 6586713 ### 18007226999 *8
*5, where # are delays inserted.
Example 2:
In this example we will enter an ID number before entering a phone number
into the pager. The pager phone number is 1 713 2352456. The ID number is
7711. The dialer is at 5481234. Calling the pager by hand from the dialer site,
we find the following:
l dial pager
l wait for pager to answer (6 seconds)
l pager beep
l enter ID (7711)
l wait for new pager prompt (2 seconds)
l enter dialer phone number (5481234)
l hang up
The phone number to enter will look something like:
1 713 235 2456 (delay 1) 7711 (delay 2) 548 1234
l In our example we programmed Phone #1:
701 1 713 235 2456 ### 7711 # 548 1234 ENTER
(Remember that each # represents a 3 second delay).
l and Phone #2:
702 548 7632 ENTER (our foreman again)
To Next Page
Loading...
