Using the Alarm Ready Schedule Feature
Verbatim Owner's Manual 7-11
b. Enter CODE “942 HH MM SS” followed by ENTER
Where:
HH = 2 digits for hours, MM = 2 digits for minutes,
SS = 2 digits for seconds.
4. Set the Weekday REARM/DISARM times:
Enter CODE “961 1600 0700” followed by ENTER to set the
REARM time to 1600 and the DISARM time to 0700.
5. Set the Weekend REARM/DISARM times:
Enter CODE “962 1200 0700” followed by ENTER to set the
weekend REARM time to 1200 and the weekend DISARM
time to 0700.
6. Set the Weekend REARM/DISARM day-of-week:
Enter CODE “963 7 2” followed by ENTER to set the weekend
REARM day-of-week to Saturday and the Weekend DISARM
day-of-week to Monday.
7. Enable both the Weekday and Weekend Alarm Ready Schedules:
Enter CODE “966 3” followed by ENTER to set the Alarm
Ready Schedule Control Number to 3 to enable both the Weekday
and the Weekend Alarm Ready Schedules.
! Note:
If the Verbatim autodialer is configured with a local printer, a summary of all
of the REARM and DISARM times will be printed.
8. Return to the Normal mode and make sure the Verbatim autodialer is
DISARMED.
To Next Page
Loading...
