Rad Power Bikes RadRover

Need help?

Do you have a question about the Rad Power Bikes RadRover and is the answer not in the manual?

Summary

General Info

Assembly and Fit

Guidance on correct assembly and fit for safety, performance, and comfort.

Safety Check Before Each Ride

Battery Charged, Secured, and Unplugged

Instructions on ensuring the battery is charged, locked, and unplugged correctly.

Assembly Instructions

Step 1: Unpack bike

Guide to unpacking the bike and checking for all included parts.

Step 2: Install handlebar onto stem

Instructions for installing the handlebar onto the stem and tightening.

Step 3: Install front wheel

Step 4: Inflate tires

Step 5: Install the pedals

Step 6: Set desired seat height

Recommended Torque Values

Adjusting the Seat Height

Adjusting the Seat Position and Angle

Adjusting the Suspension Fork

Battery Charging

Charging Procedure

Step-by-step guide for charging the bike's battery.

Battery Charging Information

Charger Safety Information

Long-Term Battery Storage

Operation

Pedal Assistance Selection

How to select and adjust pedal assistance levels.

Start-Up Procedure

Key Port and Position Identification

Battery Lock Security Test

Turning the Bike On

LCD Display Information

LCD Display Controls

LCD Display Operations

Brake Light Features and Operations

Best Practices for Extending Range and Battery Life

Driving Range

Carrying Loads

Carrying Children

Carrying Cargo

Maintenance

Basic Bike Care

Pre-Ride Safety Checklist

Recommended Service Intervals

Tire Inflation and Replacement

Troubleshooting

Error Detection

Warnings and Safety

General Operating Rules

Essential rules for safe operation and riding on roads.

Helmets

General Warnings

Safety Notes

Wet Weather

Night Riding