Need help?Do you have a question about the rada thermotap-3 and is the answer not in the manual?
Defines the standard operational environment and parameters for the thermostatic mixing tap.
Information for specific use cases beyond standard operation, refer to agent.
Guidelines for chemical disinfection procedures, including chlorine concentration limits.
Key operational parameters for the valve, with Type 3 valves taking precedence.
Recommended dynamic supply pressures and flow rates for optimal performance.
Recommended supply temperatures and blend temperature range for safe operation.
Details on hot and cold inlet supply connections and hose fitting instructions.
General requirements and precautions for installing the thermostatic mixing tap.
Procedure to remove flow regulators when dynamic supply pressure is below 0.4 bar.
Procedure to ensure thermostatic valve responsiveness before setting temperatures.
Setting limits for the maximum blend temperature to prevent scalding.
Procedure to ensure the tap shuts off completely when the lever is in the off position.
Detailed steps for adjusting the maximum blend temperature accurately.
Explanation of how the single lever controls water flow and temperature sequentially.
Troubleshooting steps for when only one temperature of water is dispensed.
Diagnosing issues with inconsistent or low water flow.
Steps to identify and resolve complete lack of water flow from the tap.
Causes and solutions for changes in the mixed water temperature over time.
Identifying and rectifying cross-contamination of hot and cold water supplies.
Adjusting the maximum temperature setting when it's not at the desired level.
Diagnosing and fixing leaks originating from the main body of the tap.
Troubleshooting steps for when the tap continues to drip after being turned off.
Addressing issues where the water flow rate is not within the expected range.
General guidelines for maintaining the product's performance and safety.
Information on arranging professional service for Rada/Mira products.
Specific types of lubricants recommended for seals and components.
Recommended steps for cleaning and routine upkeep of the tap.
How to adjust the lever mechanism to ensure a complete shut-off.
Detailed steps for disassembling, cleaning, and reassembling internal components.
Procedures for cleaning internal parts and replacing worn seals or components.
Step-by-step guide for putting the tap back together after maintenance.
Steps for cleaning or replacing checkvalves and strainers to ensure proper flow.
Approved designations and intended uses for Type 3 Valves.
Required supply pressures and temperatures for Type 3 Valve compliance.
Procedures for testing and verifying performance after installation for Type 3 Valves.
Method for regularly monitoring and recording performance of the thermostatic mixing valve.
Guidelines for scheduling future service intervals based on test results.
Details of the product warranty and coverage period.
Conditions and exclusions that void the product guarantee.
Information on how to get assistance and support for Rada equipment.
Availability and policy regarding spare parts for Rada products.
Guidance on troubleshooting and contacting support for product issues.
General| Brand | rada |
|---|---|
| Model | thermotap-3 |
| Category | Plumbing Product |
| Language | English |
To Next Page
