Need help?Do you have a question about the Radcal Corporation 9010 and is the answer not in the manual?
Explains the various measurement functions available on the Model 9010.
Details the initial power-on sequence and self-test procedures for the instrument.
Walks through a step-by-step test procedure to verify instrument functionality.
Explains the power-on sequence and the necessary stabilization period for accurate readings.
Details the various measurement functions like Dose Rate, Dose, Auto Dose, etc.
Lists common error messages and how to resolve them.
Explains how to reset all user-set parameters to factory defaults.
Details the analog signal capture option for analyzing kV waveforms.
Explains how to use the kVp measurement features with Option C.
Explains the operation and use of the kVp Pulse measurement mode.
Lists and explains error messages specific to kV-mode operations.
Details the procedure for calibrating the current-to-frequency converter.
Explains how to recalibrate the instrument's temperature measurement circuit.
General| Brand | Radcal Corporation |
|---|---|
| Model | 9010 |
| Category | Controller |
| Language | English |
To Next Page