Page 1
SPECIFICATIONS
Operational Range: Up to 99999 cubic feet, of 99999 liters
Accuracy of Totalizer: +5%
Readout of Totalizer: LCD: 2 Lines, 16 Characters, backlit. Continuous
display of cumulative volume + flow rate + elapsed
time. Flash memory backed to recall sample data in
the event of power loss.
Timer Circuit: Microprocessor-controlled crystal oscillator
Operating Voltage: 115-220VAC, 50-60Hz, 1 Phase
Current Rating: 800-1200 Watts
Dimensions: 11” Wide, 8 1/2” Deep, 9” High
Weight: 17.5 pounds (8 Kg)
Air Mover: Internally mounted; Brushless IntelliGen Blower
Motor: 1 HP, self-cooled, brushless
Eye Bolt: Top mounted, for carrying or hanging sampler.
Supplied with 2” wide, 6 foot long belt.
Air Flow Adjust Control Recessed, to be set by calibration person. ON/OFF
switch/circuit breaker controls AC power to unit.
Operating Conditions For use in a dry environment
Keypad, 16 Key – Features: Start Key: Initiate pre-programmed sample.
Stop Key: Manually terminates sample.
Units Key: Toggles display between liters
and cubic feet units.
Set Key: Allows user to change sample
preset.
Numeric Keys: Allows entry of numeric values
in response to displayed menus.
To Next Page
Loading...