RADEMACHER Troll Standard 5620

Need help?

Do you have a question about the RADEMACHER Troll Standard 5620 and is the answer not in the manual?

Summary

2. Hazard symbols

3. Safety instructions

3.1 Intended use

3.2 Improper use

Warns against using the device for purposes other than intended, especially in damp rooms, due to risks.

3.3 Expert knowledge required by the installer

Mandates that electrical connection and installation must be performed by a qualified electrician.

5. General view of the operating unit

5.2 Electrical connections

Explains the electrical connection points for power supply, external inputs, and motor rotation direction.

7. Technical specifications

8. Safety instructions for the electrical connection

8.1 Important information prior to the electrical connection and installation

Covers essential pre-connection steps like setting motor end points and parallel connections.

8.2 Electrical connection

Outlines the step-by-step procedure for safely connecting the Troll Standard to the electrical supply.

9. Installation after the electrical connection

10. Brief description of the standard display and main menu

11. Introduction to opening the menus and setting the functions

12. Initial commissioning with the help of the installation wizard

13. Manual operation

16. Menu 1 - Switching automatic mode on;off

17. Switching times (opening and closing times) [A;V], brief description

17.1 Menu 2 - Configuring opening and closing times [A;V]

Explains how to configure specific opening and closing times for different switching time programmes.

19. Menu 9 - System settings

19.2 Menu 9.5 - Configuring the switching time programme

19.3 Menu 9.6 - Configuring the blockage detection