Radial Engineering Ltd. MIX 2:1™ User Guide
2
FEATURES
1
5 7 86
2 3 4
1. On: Individually activates each input.
2. Input Level: Sets the amount of attenuation
applied to each input.
3. 180°: Used to reverse the polarity on
Input-2 to correct cancellation when
summing out-of-phase signals.
4. Level Bypass: Set & forget switch
bypasses the level controls on inputs 1
and 2. When this switch is engaged, both
inputs are summed together equally.
5. Output: Mono XLR output is balanced to
feed a powered speaker, mixing console,
or a recording interface.
6. Inputs: TRS ¼” or XLR connectors are
available for inputs 1 and 2.
7. Ground Lifts: Lifts the audio ground path
on the XLR and ¼” inputs to reduce hum
and buzz from ground loops.
8. No Slip Pad: Provides electrical &
mechanical isolation and keeps the unit
from sliding around.
To Next Page
Loading...