To Next PageTo Next Page
Need help?Do you have a question about the Radial Engineering SW8 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Input Connectors | XLR |
| Output Connectors | XLR |
| Switching | Automatic |
| Control | Manual, Remote |
| Features | LED indicators |
| Dimensions | 19" x 1.75" |
| Type | 8 channel auto switcher |
Details the controls and indicators on the front of the unit, including input selection and status LEDs.
Describes the various input/output connectors and the power supply connection on the rear of the unit.
Explains internal switches and transformers that affect audio processing and signal routing.
Details using 1/4" phone jacks for audio input from playback systems, supporting balanced or unbalanced signals.
Explains using DB25 connectors for multi-channel audio input/output with TASCAM pin-out configuration.
Describes the two main output types: DB25 direct thru-put and transformer-isolated XLR mic-level outputs.
Details manual switching via front panel, remote control via footswitch/automation, and automatic switching via Tone Track.
Explains how the Tone Track signal and THRESHOLD control are used for automatic switching to backup machines.
Covers linking multiple SW8 units and internal chassis ground lift options for system flexibility.
Details manual, automatic, and alarm modes for controlling the SW8 switcher.
Emphasizes the importance of testing the entire playback system before each performance.
Provides detailed technical data including input/output levels, impedance, switching time, and dimensions.
Addresses user queries regarding testing, switching capabilities, overloading, and ground loops.
Outlines the 3-year transferable warranty, terms, conditions, and limitations of Radial Engineering Ltd.
