EasyManuals Logo

Radiant Metric Series User Manual

Radiant Metric Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
BACKFILL AND DRAINAGE
Before backfilling, check with electrician for pool bonding. Sonotubes may be installed at the time of
collar pour to support the deck.
Backfill may go directly against a Radiant pool wall. Structrual fill is required. Do not use expansive soil
(e.g., clay).
For semi-inground or fully inground installations, the uphill run-off should be redirected around the pool
incorporating a French drain concept using a perforated drain pipe and water relief area away from the
pool and other structures.
Backfill as the pool is filling with water, manually compacting every 8”-12” (Do not use compacting
machinery.) Hand backfill around skimmers, lights and inlets. Be sure that piping is buried, but not
crushed.
Undisturbed Earth
Concrete Collar
8"
4"
Concrete Deck
CP2 Coping
Vinyl
LIner
Perforated
Drain
Pipe
Backfill
2” Bottom
Material
12"
Sonotube
Although not recommended, if backfilling completely before pool is filled, the inside of the pool
straight walls must be crossed braced at the top.
Undisturbed Earth
Concrete Collar
8"
Vinyl
Liner
Perforated
Drain
Pipe
Backfill
2” Bottom
Material
12"
Standard
Coping
Semi-Inground
Full Inground

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radiant Metric Series and is the answer not in the manual?

Radiant Metric Series Specifications

General IconGeneral
BrandRadiant
ModelMetric Series
CategorySwimming Pool
LanguageEnglish