What to do if my Radic8 VIRUSKILLER VK 401 will not turn on?
If your Radic8 Steriliser isn't turning on, first ensure the plug is correctly inserted into a grounded outlet. If that's not the issue, replace the batteries in the remote control, making sure to align them according to the correct polarity. Also, confirm that the AC outlet provides the correct voltage (220 AC) and is properly grounded.
Why is the air purifying function of my Radic8 VIRUSKILLER VK 401 not working properly?
If the air purifying function of your Radic8 Steriliser isn't working correctly, several factors could be responsible. The indoor air might be heavily contaminated, in which case you should ventilate the room. Alternatively, the pre-filter or HEPA filter could be blocked, requiring you to clean the pre-filter or replace the HEPA filter. Ensure there is enough clearance around the product and that the air inlet and outlet of the unit are unobstructed. Finally, the room might be too large for the unit; select the right Viruskiller according to the room size.
Why does my Radic8 Steriliser emit a strange smell?
A strange smell from your Radic8 Steriliser could be due to a few reasons. If the product is new, the antimicrobial coating of the reactor cell might release a small amount of harmless odor that should disappear within one to two weeks. If you've cleaned the pre-filter with water, ensure it's completely dry before reinstalling it. The smell could also be from using the product in environments with high concentrations of food odours or smoke; in these cases, use proper ventilation.
How to fix weak airflow and noise from Radic8 Steriliser?
Weak airflow and noise from your Radic8 Steriliser can occur if the pre-filter has accumulated too much dust. Clean the pre-filter to resolve this issue. Also, remember to change the HEPA filter when it's due.
What to do if the timer preset does not work on my Radic8 VIRUSKILLER VK 401?
If the timer preset on your Radic8 Steriliser isn't working, it's possible that the timer function hasn't been activated. Set the timer according to the instructions in this manual.
Basic safety precautions for operating the VK 401, including warnings about water, children, UV light, and maintenance.
Safety guidelines related to electrical connections, physical placement, and avoiding hazards during installation.
Guidelines for safe operation, including ventilation, airflow, and specific use cases like cleaning or cooking.
A guide to diagnosing and resolving common issues encountered with the VK 401 air sterilizer.
General| Brand | Radic8 |
|---|---|
| Model | VIRUSKILLER VK 401 |
| Category | Steriliser |
| Language | English |
To Next Page