RADICAL SR8 User Manual

Details the layout and components of the driver's cockpit.

Explains the different displays and gauges on the car's dashboard.

Lists and explains the various warning alarms and their conditions.

Shows different screen configurations for the dashboard display.

Identifies key components located within the engine bay.

Illustrates and labels the components of the front suspension system.

Illustrates and labels the components of the rear suspension system.

Pinpoints the location of the ECU and other electrical components in the cockpit.

Outlines essential checks to perform before taking the car to the track.

Explains how to start the engine, use paddle shifts, and stop the car.

Provides a step-by-step guide for the initial track shakedown of a new car.

Explains the correct procedure for bedding in new brake discs and pads.

Details how to analyze tyre performance using data, pressures, and visuals.

Provides guidance on interpreting tyre wear patterns to diagnose car behavior.

Describes the procedure for safely lifting the car using air jacks.

Identifies the specific front and rear jacking points on the car.

Explains how to lift the car onto a high stand using a crane.

A step-by-step guide to adjusting various setup parameters for the car.

Details the importance and procedure for setting corner weights.

Provides a detailed setup sheet for cars equipped with Dunlop tires.

Provides a detailed setup sheet for cars equipped with Hankook tires.

Offers an in-depth table of drop height measurements for various chassis heights.

Presents drop height measurements specifically for Hankook tire setups.

Details the function and adjustment of rebound, high-speed, and low-speed dampers.

Guides on how to adjust car setup for optimal performance in wet weather conditions.

Details the procedures for changing engine oil, oil filter, and air filters.

Explains how to set up the wheel speed sensors using a specific jig.

Details the procedure for balancing the individual throttle bodies for optimal engine performance.

Recommends intervals and checks for gearbox inspection.

Guides on the correct fitment of the gearbox selector cover.

A diagnostic flowchart to help resolve engine non-starting issues.

Provides a guide to diagnose and resolve charging system issues.

Details steps to diagnose and resolve issues related to gear shifting.

Identifies the location of various critical relays within the car.

Illustrates torque specifications for engine and gearbox components.

Details torque specifications for various suspension components.

Shows torque specifications for the braking system components.

Provides a general guide to torque figures for various systems.

Lists advisory generalised bolt torques based on size and grade.

Lists key engine control parameters and their values.

Provides a list of common parts with their descriptions and part numbers.

Details the fluids required for the car, including part numbers and quantities.

Lists the sizes and specifications for front and rear roll bars.

Provides information on gear ratios for different configurations and speed calculations.

Presents a chart detailing standard (long) gear ratios.

An exploded diagram illustrating the components of the gearbox.

Details the recommended lifespan for various car components.

Outlines the recommended service schedule for the engine and gearbox.

Provides the procedure for inspecting the gearbox, including required tools.

Details the steps for removing and disassembling the gearbox.

Explains the steps for assembling and refitting the gearbox.