Need help?Do you have a question about the Radicon A Junior Series and is the answer not in the manual?
Core product description for single reduction worm units.
Description of units integrated with electric motors.
Explanation of the coding system for unit sizes, ratios, and options.
Explains mechanical capacity and thermal limitations with adjustment factors.
Step-by-step guide to selecting motorized gear units.
Step-by-step guide to selecting reducer gear units.
Dimensions for output shaft and bore options based on column 11 entry.
Tables of exact ratios for single and double reduction units.
Details on adaptor compatibility for NEMA and IEC motors.
Tables to select geared motors based on HP rating and specifications.
Tables showing dimensions for unit sizes and motor frames.
Data on maximum permissible overhung and axial loads on shafts.
Table of dimensions for different double reduction unit sizes.
Details on the optional machined spigot feature for the gear unit case.
Information and specifications for torque arm components.
Data on unit weights and packed volumes for shipping.
General guidelines for gearbox installation, component fitting, and weather protection.
Procedures for output shaft assembly and mounting units.
Instructions for connecting motors, mounting units, and shaft alignment.
Details on approved lubricants, quantities, and general safety advice.
Contact information for Radicon and Benzlers offices worldwide.
General| Mounting | Foot, Flange, Shaft |
|---|---|
| Mounting Position | Horizontal, Vertical |
| Input Options | Solid Shaft |
| Housing Material | Cast Iron |
| Lubrication | Oil |
To Next Page
