EasyManua.ls Logo

Radinn G2X - Page 33

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
Only use chargers supplied by Radinn to charge
the Power Pack. Chargers that are not supplied
by Radinn are not equipped with the electronics
and software to safely and reliably charge and
balance the cells. Therefore, charging with unau-
thorized chargers may result in destruction and
in worst case severe injury or death.
Beware of the strong line currents that are pres-
ent when charging the Power Pack, in particular
on the speed charger. Never use the charger if
the main cable is damaged. Doing so can cause
the cable to catch re and may lead to electric
shock resulting in severe injury or death.
Never open the accumulator box. Never attempt
to alter or modify the Power Pack in any way.
Doing so may cause aming gases to be dis-
charged through the accumulator cells safety
valve, causing serious injury and/or death.
Repairs and service work on the Radinn Power
Pack is restricted to Radinn and its authorized
partners.
Never leave the Power Pack connected in the
G2X or the charger when not actively intending
to charge or operate it . When the Power Pack
recognizes data connection, it starts sending
out a 12V data current. If left long enough, the
Radinn Power Pack can unnaturally and com-
pletely discharge resulting in permanently
damaging the batteries internal cells.
Ensure that there are no water or dried salt de-
posits on the contacts of the connector sockets
of the G2X, the Power Pack or the charger
when connecting (see Chapter ”G2X Mainte-
nance” ). Salt deposits can inhibit the ow of
electricity during charging and cause electrical
contacts to overheat, resulting in irreparable
SAFETY INFORMATION

Related product manuals