70
7
6
5
Always store the G2X in a dry location with
room temperature (15–28 °C/59–82 °F).
Clean the G2X with common car wax.
To avoid scratching the paint, always use
a clean cloth that is recommended for
car waxing.
Prior to running the jet outlet, always
check for plastic and other garbage in it.
Turn the G2X upside down on top of the
board’s bag and look into the jet intake.
Note:
Always disconnect both the battery and
the magnetic key from the board if you
need to remove plastic or any other fo-
reign objects from the jet.
MAINTENANCE
To Next Page
Loading...