28
29
General Safety Information Concerning
the Radinn Jetboard – continued
• Before connecting the Radinn Battery to the
Radinn Universal Charger, make sure that the
charging connector and battery connector are
clean and dry. Wet and/or dirty connections
with the battery and charger may cause a short
circuit to occur - which can result in damaged
battery electronics, re and explosions, result-
ing in severe injury or death.
• Before operating the jetboard, make sure that
the battery is securely connected to the board.
• Never stick objects into holes, openings, con-
nectors or other parts of the product. This may
damage the components, parts or board.
• Never try to service or repair anything other
than what is clearly specied. Service may only
be carried out by an authorized technician in
order to ensure safety of yourself, your envi-
ronment and the jetboard. Due to its modular
design it is unlikely that the entire jetboard will
have to be shipped to one of our facilities for
service or repair. It is much more likely that an
authorized Radinn retailer, dealer or distributor
can replace any damaged/broken component
so that you can be out in the water again in
no time. Please do not try to repair, service or
maintain anything yourself – for your own and
your environment’s safety. Service beyond rec-
ommended user maintenance by anyone other
than an authorized Radinn technician will void
your product warranty.
• Never alter or modify any part of the jetboard.
Doing so may result in severe injury or death,
as well as damage or destruction to your and
others property.
• If you detect any damage to your jetboard,
especially to the battery, charger, charging con-
nectors, seals or closing mechanism, immedi-
ately stop operating the device and contact the
manufacturer and/or your authorized Radinn
dealer.
SAFETY INFORMATIONSAFETY INFORMATION
To Next Page
Loading...