Radinn Jetboard - Board Preparation - Pairing and Fins; Installing Optional Fins; Securing Hand Controller and Magnetic Key

56
57
BOARD PREPARATIONS BOARD PREPARATIONS
21
Turn the board upside down to reveal the
n slots.
Attach the ns to the board according to
the illustration.
To remove the ns, repeat this procedure
in reversed order.
Board assembly – Fins
Note:
This is optional. The ns improve turning
at lower speed.
21
Fasten and secure the magnetic key leash
tightly around your ankle or below your
knee.
Fasten and secure the Hand controller
strap around your wrist.
Fasten and Secure Hand
Controller and Magnetic Key
Note:
The Hand controller does not oat, there–
fore it must be secured around your wrist.