51
TRANSFERRING RECORDED IMAGES/VIDEO CLIPS TO
YOUR COMPUTER
You can share the recorded images/video clips with your family or friends via e-mail or post them on the Web.
Before doing so, you need to connect the camera to your computer using the USB cable and then transfer the
images/video clips.
To transfer images/video clips from the camera to your computer, follow the steps below:
Step 1: Install the USB driver
Step 2: Connect the camera to your computer
Step 3: Download the images/video clips
System Requirements System Requirements
(Windows) (Macintosh)
CPU Pentium III 600 MHz processor or higher PowerPC G3/G4
OS Windows 98/98SE/ME/2000/XP 9.0 or higher
Memory 32MB 32MB
(64MB RAM recommended) (64MB RAM recommended)
Free Space on Hard Disk 128MB hard disk space 128MB hard disk space
Required Devices A CD-ROM Drive, A CD-ROM Drive,
An available USB port An available USB port
Color Monitor Color Monitor (800x600, 24-bit or Color Monitor (800x600, 24-bit or
higher is recommended) higher is recommended)
To Next Page
Loading...