Radio Shack 21-534 - Page 12

12
• If your transmitter’s power is 20 watts or less, set
RANGE
to
20W
.
• If your transmitter’s power is more than 20 watts but
200 watts or less, set
RANGE
to
200W
.
• If your transmitter’s power is more than 200 watts, or
you do not know the transmitter’s power, set
RANGE
to
2000W
.
3. Set
MODE
on the front of the meter to the correct setting
for your transmitter.
• If your transmitter uses SSB or CW, set
MODE
to
PEP
to measure peak envelope power.
• If your transmitter uses another type of output, set
MODE
to
AVG
to measure average power.
21-534.fm Page 12 Thursday, August 5, 1999 3:53 PM