12
DIODE
—
press to check all types of diodes.
SCR
—
press to check SCRs and TRIACs.
CONT
—
press to check for continuity.
ANODE/NPN
—
lights to show the anode of a diode
or the junction type of a transistor.
ANODE/PNP
—
lights to show the cathode of a di-
ode or the junction type of a transistor.
BAD
—
lights if the tester determines that a com-
ponent is faulty.
BASE3
,
BASE2
,
BASE1
—
light to show specific in-
formation about the junction of a device connected
to the test sockets or test clips.
22-330.fm Page 12 Friday, August 6, 1999 12:34 PM
To Next Page
Loading...