11
Component Slot
—
lets you connect a compo-
nent with 2 legs (an axial diode, for example). The
tester’s component slots are labeled
–
and +.
Test Socket
—
lets you connect a component
with 3 legs. The test sockets are labeled
BASE3
(black),
BASE2
(yellow), and
BASE1
(red).
Test Clip
—
lets you connect a component with 2
or 3 legs or terminals. The test clip’s insulators are
colored black, yellow, and red.
CONTROLS AND DISPLAYS
TRANS
—
press to check bipolar transistors,
JFETs, MOSFETs, and IGBTs.
22-330.fm Page 11 Friday, August 6, 1999 12:34 PM
To Next Page
Loading...