14
•
TRANS
to test a bipolar, JFET, MOSFET, or
IGBT transistor. The tester shows the transis-
tor’s base and collector and tests if the tran-
sistor is working properly. (The remaining pin
is the emitter).
This section shows what the tester displays when
you test each type of component.
Legend
- off
- on
- flashing
Note:
See “Component/Testing Notes” on
Page 22 for additional information about each
type of component you can test.
F
22-330.fm Page 14 Friday, August 6, 1999 12:34 PM
To Next Page
Loading...