4
Your tester has these features:
Auto On/Off
—
automatically turns on at the
touch of a button and off when you finish using it.
Three Connection Options
—
quickly connect
components to the tester using its built-in test clips
and sockets, or connect components with axial
leads to the tester’s component slots.
Continuity Check
—
lets you quickly hear and
see if there is continuity between both ends of a
cable.
Your tester requires three AAA batteries (not sup-
plied).
22-330.fm Page 4 Friday, August 6, 1999 12:34 PM
To Next Page
Loading...