4
Plug in the Receiver
1. Take out the USB
receiver dongle from the
battery compartment.
2. Turn on your computer.
3. Plug the receiver into
your computer’s USB
port.
Pair the Dongle and Keyboard
When using your keyboard for the fi rst time, you need to pair
the dongle and keyboard.
1. Position the keyboard
within 20 in. (50cm) of the
dongle. Slide the ON/OFF
switch on the back of the
keyboard to ON.
2. Press CONNECT.
Pairing is completed
automatically. If pairing
fails, press CONNECT again.
n Note:
If you do not plan to use your keyboard for several
minutes, slide ON/OFF to OFF to save battery power.
CONNECT ON/OFF
To Next Page
Loading...
