Radio Shack 32-2055 - Page 2

©2004 RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
32-2055
06A04
Printed in China
XLR Balanced
Microphone Inputs
Connect up to four high-
impedance microphones to
your amplifi er.
Cooling Fan
Automatically activated whenever
the amplifi er is turned on. This
forced air cooling system rapidly
exhausts interior heat to reduce
operating temperature.
¼” Unbalanced
Microphone Inputs
Connect up to four microphones
to your amplifi er, via a ¼”
unbalanced bable.
¼” Input Jacks
Connect input sources (CD
or DVD player, TV, etc.) here,
via a ¼ (balanced) audio
cable.
Fuse
Ground Wire
Connection
Phono Input
Jacks
Connect your
turntable here.
MIX BUS Jack
Connect an extra
amplifi er if you
have multiple
audio sources.
CD/AUX Jack
Connect any high-level
sound source for music
or special effects.
EQ IN/OUT Jacks
Connect an
equalizer or other
external processor.
EQ/BYPASS Selector
Select EQ if you are using
an equalizer or BYPASS
if you are using another
external processor.
STEREO/MONO Selector
Select bridged
mono input mode in
combination with a mono
signal source plugged
into the left channel.
Speaker Terminals
Connect two sets of
speakers (Left and
Right, for A and B).
Audio Input Jacks
Connect input sources (CD
or DVD player, TV, etc.) here,
via an unbalanced audio
cable. Match the colors on
your cable connections with
the colors on the jacks.
MIC 4/PHONO Switch
Select MIC 4 or
PHONO input.