J
Jasmine PenningtonAug 1, 2025
Why can't I hear anything from my Radio Shack 32-2055 Amplifier?
- MMary RichardsonAug 1, 2025
If you can't hear anything from your Radio Shack Amplifier, there might be several reasons: 1. The amplifier's LEFT and RIGHT VOLUME, MIC1, MIC2, MIC3, MIC4/PHONO, or CD/AUX controls might be set too low. Adjust the volume control to the desired setting. 2. The speakers might not be connected correctly; check all connections. 3. A microphone or cable might be faulty, so inspect all microphones and cables. 4. The speakers might be the wrong impedance for the PA. Ensure your speaker wires are 18-gauge [for wire length up to 7.6 m (25 ft)]. For best results, use the shortest length of speaker wire possible. 5. The amplifier might have shut down. Turn the amplifier off and let it cool down. Make sure the amplifier is properly vented, then turn it back on.