Radio Shack 32-2059 - User Manual

Please read this user’s guide before installing,
setting up and using your new product
www.radioshack.com
Dual 15 Band Graphic Equalizer
Quick Start Guide
User’s Guide
Thank you for purchasing your Dual 15 Band Graphic
Equalizer from RadioShack. Your new equalizer features
narrow band frequency balance controls that provide a
wide array of frequency response variations. You can now
match the speakers to your room, reduce or eliminate
inadequacies in your high fi delity sound system, and tailor
the reproduction of music to your heart’s desire.
32-2059
Dual 15 Band
Graphic Equalizer

Radio Shack 32-2059 Specifications

General

Control Range	±12dB
Input Sensitivity	150mV
Output Impedance	600 ohms
Power Requirements	120V AC, 60Hz
Total harmonic distortion	0.05%
Signal to Noise Ratio	90dB
Channel separation	60dB
Bands	10
Input Impedance	50k ohms
Weight	7.1 lbs
Frequency Response	20Hz to 20kHz
Frequency Bands	10

Summary

Getting to Know Your Equalizer

Important Safety Instructions

Before You Begin

Connecting Your Equalizer

Connecting Input Sources

Explains connecting line level inputs via stereo phono or 1/4" audio cables.

Connecting Output Sources

Details connecting equalizer outputs to amplifiers/mixers using various audio cable types.

Connecting REC Output

Describes connecting the equalizer's output to a recorder's input for sound recording.

Using the Ground Lift Switch

Guides on using the ground lift switch to eliminate hum or buzz in the sound system.

Using Your Equalizer

Replacing the Fuse

Caring for Your Equalizer

FAQS

Product Specifications