5
wCAUTION:
• DO NOT set ALK/RCH to RCH if alkaline batteries are
installed.
• Charge for at least 16 hours when using new rechargeable
batteries for the fi rst time.
Using Your Headphones
Place the transmitter at the same height as the headphones or
higher, with the IR LEDs facing straight toward the headphones.
1. Turn on the transmitter and the headphones. Both of the
power LEDs light red.
2. Set the headphone volume to minimum.
3. Turn on the audio source, and gradually increase the
volume to a comfortable level.
4. Turn the E-BASS (enhanced audio) on or off, and adjust the
VOICE CLARITY if necessary.
nNote:
• Place your transmitter away from strong light; avoid pointing it
at a window where sunlight might prevent optimum reception.
• Remove objects between the transmitter and headphones.
Green circle LED fl ashes when charging,
and lights when fully charged.
Line up triangle
icons.
L
R
To Next Page
Loading...
