Radio Shack 40-1024A - User Manual

Cat. No.
40-1024A
©
1996 Tandy Corporation.
All Rights Reserved.
Radio Shack is a registered trademark used by Tandy Corporation.
8" Polypropylene Cone Woofer
Your Radio Shack 8" Polypropylene
Cone Woofer lets you increase the
bass response of your sound sys-
tem, whether it is a home or car, ste-
reo or monaural system.
FEATURES
Li
g
ht, Ri
g
id, Pol
y
prop
y
lene Cone
— extra-durable, long-life cone re-
sists effects of moisture and temper-
ature extremes, and withstands
greater stress at high volume levels.
Rolled Urethane Foam Surround
— minimizes distortion and im-
proves clarity.
Lon
g
-Throw Voice Coil
— delivers
clean, solid sound.
MOUNTING
You can install the woofer from the
front or back of an enclosure so it is
flush with the baffle’s surface. Seal
the mounting surface so air cannot
leak around the woofer.
For details, see our “Building Speak-
er Systems” book (not supplied),
available at your local Radio Shack
store.
40-1024a.fm Page 1 Tuesday, August 10, 1999 1:02 PM

Radio Shack 40-1024A Specifications

General

Type	Powered Subwoofer
Driver Size	8 inches
Frequency Response	40Hz - 180Hz
Impedance	8 Ohms
Enclosure Type	Bass Reflex
Crossover Frequency	50 Hz - 150 Hz (variable)
Inputs	Line-level RCA

Summary

8 Polypropylene Cone Woofer Overview

Product Features

Details key attributes like durable polypropylene cone, urethane surround for clarity, and a long-throw voice coil for sound quality.

Mounting Instructions

Guidance on installing the woofer flush with enclosure surface, ensuring an airtight seal for optimal performance.

Speaker Specifications

Electrical and Physical Parameters

Comprehensive list of technical specifications including impedance, frequency response, power handling, and various acoustic parameters.

Limited Warranty Information