EasyManua.ls Logo

Radio Shack 63-247 - User Manual

Radio Shack 63-247
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2 3 4
Thank you for purchasing your Atomic Wall Clock
from RadioShack. Please read this user’s guide before
installing, setting up, and using your new clock.
Atomic Wall Clock
User’s Guide 63-247
Check package contents
Features
• Sets automatically and stays set
• Synchronizes with the U.S. atomic clock in Fort Collins,
Colorado
• Automatically updates for Daylight Savings Time
• Mounts on a wall, or sits on a flat surface
• Displays time in 12 or 24 hour format, date, day of the
week, and temperature in Fahrenheit or Celsius
Install Batteries
Your clock requires 2 AA batteries (not supplied) for
power.
1. Flip open the stand.
2. Lift the tab on the battery cover on the back of the
clock.
3. Insert two AA batteries into the battery compartment,
following the polarity symbols (+ and –) marked
inside.
4. Replace the cover.
Battery Notes
• Dispose of batteries promptly and properly. Do not
burn or bury them.
• Use only fresh batteries of the required size and type.
• Do not mix old and new batteries, different types of
batteries (alkaline, or rechargeable), or rechargeable
batteries of different capacities.
Battery cover
• If you do not plan to use your clock for more than
a month, remove the battery. Batteries can leak
chemicals that can damage electronic parts.
Display your clock
Using the stand
Flip open the stand on the
back and push it into the slot
at the base of the clock until
it clicks. Place the clock on a
flat surface.
Mounting on a wall
1. Drill a hole in the wall at the desired location.
2. If needed, insert an anchor (not supplied) into the
hole. Drive a screw (not supplied) into the hole,
leaving about
3
/16 in. (4.8 mm) exposed.
3. Slide the clock’s keyhole slot onto the exposed screw
head.
Set up your clock (Optional)
The clock shows the current time, day of the week, and
indoor temperature. The clock attempts to synchronize
with the atomic time signal automatically when you first
set up the clock and whenever you press RESET.Ifthe
clock does NOT automatically display, do the following:
Stand
Keyhole slot
Quick Start
User’s
Guide
Atomic Clock
Question and Answer IconNeed help?

Do you have a question about the Radio Shack 63-247 and is the answer not in the manual?

Radio Shack 63-247 Specifications

General IconGeneral
BrandRadio Shack
Model63-247
CategoryClock Radio
TypeDigital
DisplayLED
Power SourceAC
Snooze FunctionYes
Sleep FunctionYes
Alarm TypeBuzzer/Radio
Radio BandAM/FM
Backup Battery9V

Summary

Atomic Clock Features and Package Contents

Check Package Contents

Verifies all items are included in the box before setup.

Product Features

Details automatic time setting, DST updates, mounting options, and display formats.

Atomic Clock Installation and Setup

Install Batteries

Instructions for installing two AA batteries to power the atomic clock.

Display Your Clock

Guide on using the stand or mounting the clock on a wall for display.

Set Up Your Clock (Optional)

Steps for manual time setting if automatic synchronization fails.

Manual Time Setting and Resetting

Manual Time Setting

Detailed steps for manually adjusting time zone, DST, year, date, and time.

Resetting Your Clock

Procedure to reset the clock for re-synchronization if inaccuracies occur.

Atomic Clock Signal Reception and Care

Signal Reception

Information on how the clock receives the atomic time signal and troubleshooting.

Care and Use

Guidelines for maintaining the clock and avoiding damage from external factors.

Limited Warranty

Details the 90-day warranty against defects and exclusions.

Related product manuals