15
SPECIAL FEATURES
MANUALLY SETTING THE TIME,
DATE, AND LANGUAGE
When you turn off automatic time setting or if the clock does not
receive a good radio signal, you can manually set the time and
date.
Important:
The clock automatically updates the time and date
whenever you program it to automatically set the time and date
(see “Turning Automatic Time Setting Off/On” on Page 16) and
it receives a good radio signal. If you do not want this to hap-
pen, turn off automatic time setting.
1. Repeatedly press
ZONE/AUTO OFF
to select the desired
time zone. As you press
ZONE/AUTO OFF
, the time zone you
select is highlighted on the display and a letter (
P
for
Pacific,
M
for Mountain,
C
for Central, or
E
for Eastern)
appears above the time zone.
2. Hold down
MODE/SET
until the hour digit flashes.
3. Repeatedly press or hold down
+/AUTO ON
to set the hour.
Note:
AM
appears for AM hours and
PM
appears for PM
hours.
4. Press
MODE/SET
. The minute digits flash.
5. Repeatedly press or hold down
+/AUTO ON
to set the
minute.
6. Press
MODE/SET
. The year digits flash.
63-968.fm Page 15 Friday, July 2, 1999 2:19 PM
To Next Page
Loading...