Radio Shack 6300333 - Set up the Sensor; Install a Battery; Mount the Sensor on an Outdoor Wall

3
1 Set up the Sensor
Install a Battery
1. InsertoneAAbattery
(notincluded),matching
thepolaritysymbols(+
and–)markedinsidethe
compartment.
2. FirstslideChannel
1 2 3tochoosea
channel.Thenusea
pointedobjecttopress
RESET.Ifyouareusing
morethanonesensor,
chooseadifferentchannelforeachsensor.
n Notes:
• Whenthelowbatteryicon appears in Outdoor
Temperature Display,
replace the battery.
• Use alkaline batteries for
longer usage, or use consumer
grade lithium batteries in
temperatures below –4˚F (–20˚C).
Mount the Sensor on an Outdoor Wall
Placethesensoroutdoorsnotmorethan98feet(30meters)
fromtheforecaster.Positionthesensorfacingtheforecaster
withfewobstructions.Makesurethesensorisoutofdirect
Channel
1 2 3
RESET
AA