EasyManua.ls Logo

Radio Shack Automatic Desktop Dialer - Installing Batteries

Radio Shack Automatic Desktop Dialer
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
INSTALLING BATTERIES
Your dialer uses two AAA batteries (not supplied) for power. For
the best performance and longest life, we recommend alkaline
batteries, such as RadioShack Cat. No. 23-555.
Cautions:
Use only fresh batteries of the required size and recom-
mended type.
Do not mix old and new batteries, different types of batter-
ies (standard, alkaline, or rechargeable), or rechargeable
batteries of different capacities.
Note:
If you are replacing the batteries, disconnect the dialer’s
modular line cord from the telephone jack during the battery in-
stallation process.
Follow these steps to install batteries.
1. Use a screwdriver to remove the screw in the battery com-
partment cover on the bottom of the system, then remove
the cover.
2. Put fresh batteries into the compart-
ment as indicated by the polarity sym-
bols (+ and –) marked inside.
43-444.fm Page 4 Friday, August 13, 1999 8:31 AM