10
Operation
display angle, or whenever
DISTOR-
TION
continuously appears.
Note:
When calibrating the compass, you
will need to drive your vehicle in two com-
plete circles. Be sure your vehicle is on
level ground, in an open area, such as a
parking lot.
See “Mounting the Compass” on Page 6
and make sure the compass is securely
mounted, then follow these steps to cali-
brate your compass.
1. Press
ADV
so
BASIC
appears.
2. Hold down
ADV
until
CAL
flashes.
3. Press
ENT
so
Hold
and
StILL
appear briefly.
CAL
appears again
and
TURN
TWICE
flashes.
63-1102.fm Page 10 Wednesday, August 16, 2000 4:33 PM
To Next Page
Loading...