16
Operation
Note:
If at any time during programming
you do not press a button for about 5
minutes, the compass exits the program-
ming mode. Start over at Step 1.
1. Repeatedly press
ADV
until
12:00
or the previously set time appears.
2. Hold down
ADV
until all digits flash.
3. Press
ENT
.
12
Hr
appears
4. Press
ADV
to toggle between the 12-
and 24-hour time formats. Press
ENT
to select the desired time format.
5. If you select the 12-hour time format,
A
or
P
flashes for AM or PM time.
Press
ADV
to toggle between AM
and PM, then press
ENT
to store the
setting. The first hour digit flashes.
63-1102.fm Page 16 Wednesday, August 16, 2000 4:33 PM
To Next Page
Loading...