20
Operation
1. Hold down
ADV
and
ENT
at the same
time until
rESE7
flashes.
2. Press
ENT
to reset the compass. All
segments appear briefly.
3. Recalibrate the compass (see “Cali-
brating the Compass” on Page 9)
and reset the time and automatic
shut-off values as necessary.
Notes:
• If you decide not to reset the com-
pass, press
ADV
twice to exit the
reset mode.
• If at any time during resetting you do
not press a button for about 5 min-
utes, the compass exits without
resetting. Begin again from Step 1 to
continue resetting the compass.
63-1102.fm Page 20 Wednesday, August 16, 2000 4:33 PM
To Next Page
Loading...