Radio Shack System 240 - Connecting to Phone Line; Connecting to a Single Line

11
CONNECTING TO THE PHONE LINE
CONNECTING TO A SINGLE LINE
The Caller ID module connects to the phone line using a modular telephone-line
connector. If your phone line does not have this type of jack, you can update the
wiring yourself using necessary adapters available at your local RadioShack
store. Or, you can have the telephone company update your telephone wiring
for you.
Note:
The USOC number of the jack to be installed is RJ11C.
43-962A.fm Page 11 Monday, August 16, 1999 3:33 PM