12
When
BATT
appears or the display dims, replace the batteries.
Cautions:
• Always remove old or weak batteries. Batteries can leak
chemicals that can damage your system.
• Dispose of dead batteries promptly and properly. Do not
bury or burn them.
CONNECTING THE AC ADAPTER
To power the system, plug the adapter’s barrel plug into the
9V
DC 200mA
jack on the back of the system. Then connect the
other end of the adapter to a standard AC outlet.
Caution: The supplied adapter was designed specifically for
your system. Use only the supplied adapter.
(illus)
43-933.fm Page 12 Monday, August 16, 1999 2:59 PM
To Next Page
Loading...