17
3. Thread a screw through each hole, letting the
head extend
1
/
8
inch from the wall.
4. Attach the mounting bracket to the system
(see “Attaching the Mounting Bracket“ on
Page x).
5. Route the phone line cords and AC adapter
cord through the slots on the back of the
bracket.
6. Line up the keyhole slots on the bracket with the screws in
the wall, then slide the system down onto the screws until
it is secure.
(illus)
(illus)
43-933.fm Page 17 Monday, August 16, 1999 2:59 PM
To Next Page
Loading...