FREE
I
FREE
[:drive] [(parameter)]
Command I
Lists the amount of space that
is
free (available for use) and the
number of files on each drive, if no
drive
is
specified.
If
drive is
specified, displays a free-space map of the disk
in
that drive.
You can use FREE to see how many files are on a disk. You can also
use FREE to see a table containing information about each disk
in
your computer.
The parameter is:
PRT sends output to the printer.
FREE displays free-space information about each enabled disk
in
the
following format:
Drive
:0
TRSDDSG0
02/02/83
Free
Space
=
94.50K/
180.00K
Files
=
96/128
Drive:1
TRSDDS60
02/17/83
Free
Space
=
91.50K/
180.00K
Files
=
97/128
Drive:2
[No
Disk
]
Drive:3
[No
DisK
]
1.
Drive number - The number of the drive whose free space map is
displayed.
2.
Disk name - The name of the disk.
3.
Date - Creation date.
4.
Free space
in
K - The amount of space (in
K)
that is available for
use. 1K
= 1024 bytes.
5.
Total space
in
K - The total amount of space (in
K)
on the disk.
6.
Number of files - The number of directory entries you have
available. Each file uses one or more directory slots.
7.
Total number of files - The total number of directory slots
available on the disk.
1-85
To Next Page
Loading...
