3. Slide
the
RS-232C Interface
onto
Metal
Support
Bracket A so
that
the
RS-232C 60-Pin
connectors
are
connected.
(See Figure
3.)
Bracket B
'ii!----~
Long Screws
Figure
3.
Connecting the
PC-2
to
the RS-232C
Interface.
4.
If
you
are using
the
AC
Adapter,
plug it
into
the
PC-2
RS-232C Power
Supply
Jack.
Connecting
the
PC-2 Printer/Plotter/Dual Cassette
Interface
to
the
PC-2 RS-232C Interface
1.
At
the
bottom
of
the
PC-2
Printer/Plotter/Dual
Cas-
sette
Interface, remove screws A
and
B.
Position Metal
Support
Bracket B so
that
the
Interface
cI
ips
to
the
slot
of
the
bracket.
To
secure
the
metal
bracket,
use
the
long screws included with
the
package. (See Figure
4.)
6
Figure 4. Connecting Metal
Support
Bracket B
to
the
PC-2 Printer/Plotter/Dual Cassette Interface.
2. Slide
the
RS-232C Interface
onto
Metal
Support
Bracket B so
that
the
Interface's male 60-Pin Plug con-
nects with
the
Printer/Plotter/Dual
Interface's female
60-Pin Plug. (See Figure 5.)
RS-232C
connector
Figure
5.
RS·232C Interface
to
Printer/Plotter/Dual
Cassette Interface.
7
To Next Page
Loading...