4 5
USING THE RADIO
To select a channel, press
CH
or
CH
. Hold
down
CH
or
CH
to rapidly change channels.
The selected channel number appears.
The automatic shut off timer automatically turns
off the radio if it is idle for 2 hours. Hold down
CH
while turning on the radio to enable or disable
the timer.
On or OF (off) appears briefly.
Then, if the radio is idle for 2 hours,
OF appears
steadily. Press any button to operate the radio
again.
OF disappears and the last selected chan-
nel appears.
You can cause a tone to sound
on all radios tuned to the same
FRS channel (and quiet code, if
one is used) as your radio. Just
hold down
CALL
.
Note:
Holding down
CALL
while
turning on the radio resets your
radio.
See “Using the Quiet Feature” on
Page 6.
To talk, hold down
PUSH-
TO-TALK
until appears,
then speak into the micro-
phone. Release
PUSH-TO-
TALK
when you finish.
BUSY appears when a
call is being received.
To hear everything hap-
pening on a channel,
including weak transmis-
sions, hold down
MON
.
Release
MON
to turn
auto-squelch back on.
Rotate
VOL
to turn on your
radio and adjust the volume.
Connect an optional speaker/
microphone with a
3
/
32
-inch
mini plug and a
1
/
8
-inch plug
to the
MIC/SPK
jacks (or an
earphone with a
1
/
8
-inch plug
to the
SPK
jack).
To attach the belt clip, align the screw
with the hole in the back of the radio,
then tighten the screw.
To lock or unlock the
QUIET
,
CH
, and
CH
keys, hold down
MON
and press
CALL
.
appears and the
QUIET
,
CH
, and
CH
keys
do not operate when keypad lock is on.
Important:
The FCC does
not allow you to send a con-
tinuous tone for more than 10
seconds at a time on FRS
frequencies. Do not hold
down
CALL
for more than 10
seconds.
illus (front view
of radio, centered)
Microphone/Speaker
Display
21-1807.fm Page 4 Thursday, August 5, 1999 2:39 PM
To Previous Page
Loading...
