PG 16
Simple Screen
This display mode limits the amount of information on screen and limits the functions to just the +/- arrows
and the MENU button. To set, with mode in OFF and ...
Hold down the PROGRAM button for 12 seconds to access the limited display screen.
Hold down the PROGRAM button for 12 seconds to leave the limited display screen.
RESET button The RESET button re-boots the CT50 processor. It does not effect the user programs that
have been stored in permanent memory.
Compressor Protection The CT50 has a minimum cycle time of 4 minutes to protect your
compressor in cool and in heat pump (if you have one). The Home screen will show a small clock and A/C
during this time and the compressor will not come on until the 4 minute delay is over.
To Next Page
Loading...
Need help?
General
