25 26
23: SQL
SQL means Squelch, the ability to receive weak signal.
Level 0: Squelch off
Level 1-9: Level 1 is the lowest squelch level, level 9 is the highest squelch level.
If the squelch is set to the 9, the radio will receive the strongest signals only.
24: SCAN (Scan pause time)
2SP: The time lag from the active signal end to the next signal start.
5ST, 10ST, 15ST: The time lag from the active signal start to the selected time end.
25: LIGHT
You can adjust the LCD screen backlit brightness from 1 to 5.
26: VOX
This function allows hands-free conversations, just speak to the microphone closely and the communication will be
automatically activated.
You can choose among 11 levels: Off, 1-9. 1 is the highest level, 9 is the lowest level.
If this option is set to OFF, the VOX function is turned off.
*Note: the higher level, the more eminent sensitivity of the microphone. The VOX function is disabled in SCAN and
FM radio mode.
27: VOXDELAY
The time lag between the moment of the sound detected to the sound play.
28：TBST
TBST means Repeater tone.
You can select different repeater tone to connect the GMRS repeater.
With this function you can select 1000Hz, 1450Hz, 1750Hz, 2100Hz repeater tone.
29：DSPCHANNEL (Channel display settings)
Name: Display channel name
FREQ: Display frequency
CH: Display channel number
30：RESTORE
Set back to the factory default settings.
FACTORY : Reset back to the factory settings of menu
INITIALIZE: Reset back to the factory settings of menu and channel.
To Next Page
Loading...
