Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 2 9 to set the Frequency Offset
Press Menu to Select
Enter 000600 (The decimal point is automatically inserted after the 3rd digit is entered.)
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 3 0 to set the Channel to store the settings
Press Menu to Select
Use Up/Down arrows as needed to find a blank (unused) Channel.
Channels that have been used to store memory will have CH preceding the number.
Press Menu to Confirm (when a blank channel number had been selected)
Voice Prompt: Receiving Memory
Exit to Return
Once Menu is pressed, you can use the Up/Down arrows to scroll through the settings, or directly
address them using a 2-digit selection.
Additional settings can be selected as needed prior to storing the channel.
If a setting needs to be altered after the channel is stored, the channel will need to be deleted using
Menu option 31, then saved to the same channel using the additional options.
To Previous Page
Loading...
