EN-3
personnel.
• Do not use an extension cord to plug
in the device.
• The unit should be placed in a stabl
e
pos
ition with the handles (if fitted)
positioned to avoid spilling hot
liquids.
• Check that the mains voltage
corresponds to that indicated on the
device – alternating current only.
• Never use or connect your device if:
-
The power cable is worn or defective
-
The device has been dropped
-
The device has visible damage or a
malfunction
• Never disassemble the devic
e
y
ourself.
• If your device is not working, do not
attempt to repair it yourself ; please
contact the distributing store, its
after-sales service, a qualified
electrician or a similarly qualified
person in order to avoid any danger.
• It is absolutely forbidden to replace
t
he power cable yourself. If it is
damaged, it must be replaced by t
he
To Next Page