Setup in ADVANCE MENU--ATTITUDE--CH:CH5, SW3:SwC
Setup both up and center position of SwC STABL. Model and down position AUTO
model or other mode.
AT9S/AT9/AT10/AT10II: SwC at the up or center position shows that F110 will flight
in Stabilize Mode while SwC at the bottom position shows that F110 flight in Low
Speed Mode.
Setup If Controlled by T8FB
(1) Please turn on T8FB(DC 4.8~18V) first.
(2) Make sure the model type of T8FB is multirotor model, and the CH3(throttle) is
reverse.
To Next Page
Loading...
