RADIOMETER TCM3 - Page 16

2. TCM3
TCM3 and TCM30 Service Manual
General Information, Continued
Specifications
(continued)
2-10
Monitor pCO, channel
Range: 5 - 200 mmHg or 0.7 - 26.7 kPa.
Accuracy: Better than + 1 mmHg/0.1 kPa 0.1 % of reading at 25 °C.
Electrode Heat
Range: 0 - 600 mW + 10 % of reading.
Temperature Settings
37.0 °C, 41.0 °C, 41.5 °C, 42.0 °C, 42.5 °C, 43.0 °C, 43.5 °C, 44.0 °C,
44.5 °C, 45.0 °C.
Accuracy: Better than + 0.1 °C excluding sensor.
Alarms
Audio visual. The acoustic alarm will be activated after a delay of 5 seconds when
an alarm state has occurred.
pO, alarm limits: (selected by user) LOW: 0-99 mmHg/0 - 9.9 kPa
HIGH: 0 - 800 mmHg/0 - 99.9 kPa
pCO, alarm limits: (selected by user) LOW: 0-99 mmHg/0 - 9.9 kPa
HIGH: 0 - 200 mmHg/0 - 26.7 kPa
Temperature: + 0.3 °C deviation from preset value wili
cause alarm.
Battery low: Alarm goes on before the battery is empty
Leakage Currents
Enclosure Leakage Current: Max. 100 uA
Patient Leakage Current: Max. 10 uA
Continued on next page
199808-1