Radionics 6112 Quick Guide
https://alpha.adt.com/help/148[11/12/2018 10:35:09 PM]
For more information on this topic please visit the complete Radionics 6112 manual.
Battery
Please contact ADT services for information regarding your Radionics 6112 battery.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, enter your [security code] + [ENTER] + [COMMAND] + [0] + [zone number] +
[ENTER].
To unbypass a zone, enter your [security code] + [OFF].
For more information on this topic please, visit the complete Radionics 6112 manual.
Change Date and Time
To chang the date and time:
Press [COMMAND] + [4] + [5].
Enter the time in a 24 hour format, i..e, 16:34 for 4:45pm + [COMMAND].
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn chime mode on and off, press [COMMAND] + [6].
Toggle between On, to turn on the chime feature and Off, to turn off the chime feature.
Reset
To clear the display after an alarm event, press [COMMAND] + [4].
Security Codes
Your system allows up to 60 different security codes for use by other users, however user codes and
attributes can only be programmed by the Master user or Partition programmer.
To change a user code, press [COMMAND] + [5] + [user code] + [ENTER] + [new user code] +
To Next Page
Loading...
Need help?
General
